Tile Shield Epoxy Tile Grout is a premium, high-performance, two-component, resin-based epoxy grout specifically designed for use in both residential and commercial tile installations. It provides outstanding protection against stains, moisture, chemicals, Acid and dirt, making it ideal for high-traffic areas, wet spaces, and environments exposed to heavy-duty use.

Key Features

• High Strength and Durability: Offers superior bond strength, ensuring long-lasting performance.
• Waterproof and Stain-Resistant: Perfect for use in high-moisture areas like kitchens, bathrooms, and pools.
• Chemical Resistant: Resists a wide range of chemicals and cleaning agents, maintaining grout appearance and integrity.
• Easy to Clean: The smooth surface resists dirt, stains, and grime buildup, making cleaning effortless.
• Flexible and Versatile: Suitable for use with ceramic, porcelain, stones and other types of tiles.
• Non-Shrink and Non-Cracking: Ensures consistent joint integrity even under extreme conditions.

Preparation and Application Instructions

1.  Surface Preparation

• Ensure that the surface to be grouted is clean, dry, and free of any contaminants, such as dirt, dust, grease, or old adhesive residues.
• Remove any excess water or moisture from the substrate. Ensure the joints are clean and free from debris. Use a vacuum or a brush to clear the grout joints.

2. Mixing

• Mix Component A (epoxy resin) and Component B (hardener) in the correct ratio (as indicated on the packaging) until a uniform color and consistency is achieved.
• Ensure the mixture is free from lumps and thoroughly blended for optimal performance.
• Mix only the amount of grout that can be applied within the pot life (30-45 minutes).

3. Application

• Use a rubber float or grout applicator to apply the grout into the joints, pressing firmly to ensure full joint coverage.
• Remove excess grout using the float at a 45° angle to avoid disturbing the joints.
• Allow the grout to set for 15-30 minutes before cleaning excess residual with a damp sponge.
• Clean the surface with a damp sponge, rinsing frequently to ensure the surface is smooth and free of grout haze.

4. Curing

• Allow the grout to cure for a minimum of 24 hours before subjecting it to any traffic or water exposure.
• Full curing time may extend up to 48 hours, depending on the ambient temperature and humidity.

Health and Safety

Precautionary Statements

• Causes serious eye irritation.
• May cause an allergic skin reaction.
• Keep out of reach of children.
• In case of contact with skin or eyes, rinse immediately with plenty of water for at least 15 minutes and seek medical attention if irritation persists.
• Wear protective gloves, protective clothing, and eye protection.

First Aid

• Skin Contact: Wash thoroughly with soap and water.
• Eye Contact: Rinse immediately with plenty of water and seek medical attention.
• Inhalation: Move to fresh air. Seek medical attention if symptoms persist.